BMeasure-125i New Product 2019
The Beam BMeasure-125i unit is a flexible and powerful IOT measurement system for data acquisition, data logging and control in the laboratory, industrial and remote sensing arenas. Where there is a requirement to sample a larger number of channels, units can be linked to provide up to 32 synchronously sampled channels. This is ideal for many sensor array applications. The unit is low power and has flexible power supply inputs. Battery operation can be used for remote monitoring applications.
The supplied BMeasure software toolset has been developed to enable units to be simple to configure and use. Both Linux® and Windows™ operating systems are supported. Operation as an MQTT client facilitates connection to industry standard IoT cloud platforms. Operating as a data logger, the system can autonomously sample and store the data to internal FLASH memory or SDCARD for later data retrieval.
- Electronics laboratory benchtop instrument
- General laboratory R&D usage
- Machine monitoring including vibration, temperature etc.
- Structure monitoring stress, temperature etc.
- Automatic test equipment
- Process Control
- Smart buildings and remote monitoring
Operational ModesThe unit has been developed to be extremely flexible, supporting a number of operating modes
- Host Controlled
Controlled via a host computer over any of the communication interfaces a user of program can instigate measurements and capture data from the system. The digital IO lines can be both read and written, the switch inputs read and the relays operated. In effect it can act like a high specification data acquisition plug in card with the benefits of no physical plug in or software driver issues, remote location ability, multiple units per host computer etc.
In this mode the unit the unit can be programmed to make periodic measurements. These measurement can be saved on the unit for later retrieval or if network communication is available, data can be sent to a cloud based server.
In this mode the unit can run a custom developed program to perform measurements and process the results, This extended form of autonomous mode enables the unit to perform complex measurement sequences and perform simple actions based on the measurements such as operating relays or sending messages over the Internet. This could be used for remote sensing applications or vibration monitoring. Please contact us for further information.
|8 x analogue channels synchronously sampled, 24 bit, at up to 128 ksps, ±1.25V and ±12.5V ranges|
|8 x digital I/O channels 0-5V|
|2 x channel analogue outputs ±5V, 100 Ohms, 16 bit, 125 ksps|
|8 x digital I/O channels 5V input 3.3V output |
|2 x Relay channels 24V, 1A|
|USB 2.0 High speed (480 Mbps)|
|Ethernet 10/100 Mbps with PoE|
|Internal eMMC FLASH 4 GByte|
|External SDHC SDCARD up to 64 GByte|
|PoE - Power over Ethernet (802.3at Type 1)|
|USB (5V) Battery (For remote data logging operation)|
|Battery (For remote data logging operation)|
|DIN rail mounting kit|
|3G/4G Modem for remote operation. Contact us for more information. |
|Host software for Linux® and Microsoft Windows®. More info ...|
|HTML WEB interface for simple access. More info ...|
|CSV (comma separated values)|
|BMEAS (Beam BMeasure native)|
|TDMS (National instruments Technical Data Management Streaming)|
Please contact us for more information by email or using the form below. email@example.com